News

2025 2024 2023 2022 2021 2020 2019 2018 2017 all years

Date	News
18.06.2025	Check our latest publication! We produced a highly sensitive biosensor
16.04.2025	Our paper is among the most-read article
15.04.2025	New publication! Check our latest publication...
10.01.2025	Switchable topography is studied in our new publication!
07.11.2024	First 4D roadmap is published in Smart Materials and Structures
25.10.2024	Kick Start for Improved Meniscus Treatment!
24.10.2024	Our research article about self-healing sensors is published!
14.10.2024	Joachim Herz Stiftung for Dr. Apsite-Vinzio
19.08.2024	Welcoming New Master's Students
12.07.2024	Major Achievement: Top-Downloaded Article on T Junctions for Vascular Regeneration
26.04.2024	We have a new publication!
09.03.2024	2-way SMP paper is published!
08.03.2024	Andrea defended succesfully her master thesis
22.02.2024	Our invited PhD student defended succesfully her thesis!
06.02.2024	Press Release: 3D printing technology for tissue
27.11.2023	Fiber-reinforced hydrogel paper is published!
14.11.2023	Our new paper on self-healing conductive materials has been published!
28.09.2023	Do you want to know about 4D printing of photocrosslinkable PUs?
06.06.2023	New publication! Photoswitchable surfaces
15.05.2023	Andrea Saez will do her Master Thesis in our group!
10.02.2023	We have an invited student from Italy!
16.01.2023	Judith defended her Master Thesis!
06.12.2022	Andres Posada had defended succesfully his doctoral thesis!
22.11.2022	Ilia joined to our group as PhD student
10.10.2022	Do you want to know how to construct T-junctions for vascular system?
27.09.2022	Our paper about vascularization is published!
05.08.2022	PhD position in Polymer and Surface Science
18.07.2022	Postdoc position available
05.05.2022	How are the self-healing conductive materials? Read it here
19.04.2022	Our paper about tunable topography is published!
11.04.2022	Our cover art is published in ACS Biomater. Sci. Eng.
01.04.2022	Saskia Roth joined us as PhD student!
31.03.2022	Our review about Digital Light Processing is published!
22.03.2022	Juan defended his doctoral thesis!
22.03.2022	Our paper about SMP is available in Materials Chemistry Frontiers
15.02.2022	Andres' paper got published in Macromolecules!
02.02.2022	PhD positions are available
28.01.2022	Biofabrication practical course
18.01.2022	Our paper about touch spinning of elastomers is published!
18.01.2022	ICETI-1 Conference
18.01.2022	Our review on smart polymers "Materials for Smart Soft Actuator Systems" is published in Chem Review!
20.09.2021	Visit from Elite Network of Bavaria
10.08.2021	Ying has defended her thesis!
09.08.2021	Esther has succesfully defended her thesis!
29.07.2021	Franco has defended his Master Thesis succesfully!
25.06.2021	Juan's paper about touch-spinning got published in ACS Applied Biomaterials!
08.06.2021	Andres' paper got published in Macromolecules!
08.06.2021	Waseem has succesfully defended his thesis!
17.05.2021	Synytska Lab has PhD positions open!
06.05.2021	Zhander joined as Ph. D. student!
06.05.2021	Dr. Hossein joined our group as Postdoc!
20.04.2021	Dr. Neha Tiwari joined as Postdoc!
18.03.2021	Ali joined as Ph. D. student!
12.03.2021	Dr. Yongkang joined to our group as Postdoc!
08.03.2021	Muzaffar joined to our group as Ph.D. student!
27.01.2021	Juan's paper got published in ACS Applied Biomaterials
13.01.2021	Our paper in 4D biofabrication is published!
17.11.2020	Indra Apsite successfully defended her doctoral thesis
27.10.2020	A PhD position in Wearable/Flexible Sensors is available
27.10.2020	Pavel joined our group as PhD student!
03.09.2020	Our new project got granted!
01.09.2020	Mairon joined our group as PhD student!
20.08.2020	New device Potentiostat
09.07.2020	See our first trial with our new 3D printing!
03.07.2020	Two Ph.D. positions in Polymer Science are open!
03.06.2020	Aastha joined our group as PhD student!
28.05.2020	A new HiWi position is open
28.05.2020	Indra´s paper about 4D biofabrication applied to neuron regeneration got published in Biofabrication!
27.05.2020	New Postdoc position is open
16.10.2019	Indra´s paper on biofabrication of muscle microtissues using shape-changing polymers is published in Biofabrication !
15.10.2019	Gissela Constante joined our group as PhD student
14.10.2019	Yaoming´s paper on shape-changing films is published in European Polymer Journal !
05.09.2019	Gissela has successfully defended her Master Thesis
01.09.2019	Amit Shukla joined our group
02.08.2019	Hazem Alkazemi has successfully defended his Master Thesis
01.08.2019	Katharina Bauer joined our group
30.06.2019	Project supported by Volkswagen Foundation initiative "Experiment" was highlighted
12.06.2019	Mojdeh Azarnia joined our group
10.05.2019	Dr. Arpan Biswas joined our group
01.05.2019	New paper on polymer brushes in Macromolecular Chemistry and Physics
27.03.2019	New review paper in Advanced Optical Materials
13.03.2019	New postdoc in the group!
12.03.2019	New DFG project is funded!
11.03.2019	Saurav Ranjan Mohapatra has successfully defended his Master thesis
01.01.2019	Postdoctoral position in 3D printing is open
13.12.2018	Our review paper is published in Journal of Materials Chemistry B
09.12.2018	"Experiment!" project from Volkswagen Stiftung is granted !
01.11.2018	Soumyadip´s paper on Li-S batteries is published in Particle & Particle Systems Characterization!
30.10.2018	Invited talk about 4D biofabrication was delived in Biofabrication 2018 Conference in Würzburg
10.10.2018	Gissela Constante-Ibarra joins our group as Master Student.
01.10.2018	Andrés Fernando Posada Murcia joins our group as PhD student.
25.07.2018	Vlad Stroganov has successfully defended his PhD thesis
21.07.2018	Soumyadip´s paper on Li-S batteries is published in Polymer !
09.07.2018	Our new review on 4D Biofabrication is published in Advanced Healthcare Materials
23.04.2018	Two PhD positions are open !
18.01.2018	Vlad´s paper is published in Advanced Functional Materials !
14.01.2018	Soumyadip´s paper is published in Advanced Materials Interfaces !
14.01.2018	Juan Manuel Uribe Gomez joined our group as PhD student !
30.10.2017	Our work on 4D biofabrication in Advanced Materials is highlighted in AdvancedScienceNews, 3dprintingindustry.com, 3dmednet.com, Imagiclay.com, and DGM.de!
21.09.2017	PhD position in 3D printing of biomaterials is open!
07.09.2017	Alina´s paper is published in Advanced Materials
27.08.2017	Indra´s paper is accepted for publication in Biomacromolecules
15.08.2017	Anne´s paper is published in Journal of Power Sources
14.08.2017	Anne´s paper is published in Energy Storage Materials
10.07.2017	Georgi´s paper is published in Macromolecular Rapid Communication
01.06.2017	Prof. Ionov's Soft/Bio-Materials Group moved to the University of Bayreuth
05.04.2017	Our paper about fibeous separators for Li-S batteries is published in Physical Chemistry Chemical Physics

Webmaster: Univ.Prof.Dr. Leonid Ionov

Faculty of Engineering Science

Biofabrication – Prof. Dr. Leonid Ionov

News